Simplify experimental setup with 2Dex™ plug-and-play sensors
Use a 2Dex Hall sensor without having to build your own measurement circuit or apparatus. Lake Shore plug-and-play 2Dex sensors connect directly to the F71/F41 teslameters. This gives you the measurement simplicity and performance of a teslameter/probe combination with the installation flexibility of a Hall sensor.
These sensors include several features that significantly improve their accuracy and ease-of-use. There is an integrated thermistor for temperature compensation, as well as the sensor's calibration data stored on the connector. The convenient quick connector simplifies installation, and the teslameter cable comes in a variety of lengths.
Quickly disconnect the sensor from the larger teslameter cable to more easily route cables and mount the sensor.
In situations where a slightly longer sensor lead is required before transitioning to the thicker teslameter cable, extension cables can be placed inline without the need to cut or solder wires.
Single-axis sensors can be extended to 75 cm with just one extension cable. Two extension cables extend the sensor wiring to 75 cm for 3-axis sensors, with one extension supporting the x-axis and thermistor, and the second extension covering the y-axis and z-axis.
Choose standard copper wire to match the rest of the circuit, or phosphor bronze wire to minimize heat leak in cryogenic system environments.
To maintain optimum performance of these sensors, recalibration services are available for all plug-and-play 2Dex sensors. Choose part numbers ending in CERT for recalibration of a sensor and an update to the sensor EEPROM to achieve specified accuracy. Part numbers ending in DATA include calibration data as well.
For US customers who need a quick turnaround, our expedited recalibration service allows you to skip the queue and minimize your downtime.