Downloads

Open source projects used to write the software included in the Ethernet firmware:

Open source code used inOpen source code projectsOpen source code website

Curve Handler utility

JFreechart project source code

JFreeChart

Curve Handler utility

Apache POI project source code

Apache POI

Ethernet Firmware Updater

Jakarta Commons Net project source code

Jakarta Commons Net

Firmware features added:

Instrument firmware versionFeatures added

1.1

Minor bug fixes.

1.2

Added two new excitation frequencies (11.6 and 8.12 Hz) for the measurement and control channels. Added support for cubic spline curves.

1.3

Minor bug fixes.

1.4

Corrected the operation of the *CLS command. This command should clear out the ESR and STB registers but instead it was clearing out ESR and SRE.

Changed the operation of the OVLD (overload) bit in the STB register. The OVLD status bit in the STB register is now a summary (OR condition) of the overloads for the control channel (if enabled) and the current scan channel. If there is an overload on a different scan channel, then it will not be included in the OVLD bit until it becomes the active scan channel.

Corrected 370 emulation problems with the following commands: ZONE, FREQ, RAMP.

Corrected rounding/resolution problems on the following command queries: MOUT?, AOUT?, HTR?

Corrected the filter used for the input readings (both control and measurement inputs). A reading offset can be accumulated if the filter has not been reset for an extended time (on the order of a day). The filter will normally be reset if a reading exceeds the filter window or if the scanner changes channels (on the measurement input).

  
Ethernet firmware versionFeatures added

1.1

Instrument Configuration Backup utility added.

2.0

Chart Recorder utility added.

Support for Model 350 added.

2.1

Chart Recorder and Instrument Configuration utilities updated to support the Model 3062 scanner option card.

2.2

Added support for the Model 224.

Increased number of simultaneous TCP socket connections allowed from 2 to 5.

2.3

Fixed issue resulting from Java 7 Update 51 and newer requiring the permission attribute in the .jar file to match the corresponding attribute in the .jnlp file. If they don't match, an error message is displayed and the application is not allowed to run.

2.4

Added support for the Model 372.

2.5

Updated expired certificate.

2.6

Updated expired certificate for Java apps.

2.7

Updated to support new hardware revision of Ethernet module.

Fixed Ethernet uptime status.